User Manual Manual

AFG-2225 Series User Manual
108
Frequency Sweep
The function generator can perform a sweep for sine, square or ramp
waveforms, but not noise, and pulse. When Sweep mode is enabled,
Burst or any other modulation modes will be disabled. When sweep
is enabled, burst mode is automatically disabled.
In Sweep mode the function generator will sweep from a start
frequency to a stop frequency over a number of designated steps.
The step spacing of the sweep can linear or logarithmic. The
function generator can also sweep up or sweep down in frequency.
If manual or external sources are used, the function generator can be
used to output a single sweep.