User Manual Manual

AFG-2225 Series User Manual
124
3. Press F4 (Period).
rod

4. The Period parameter will become highlighted
in the Waveform Display area.
5. Use the arrow keys and scroll
wheel or number pad to enter
period time.

/


 



6. Press F1~F3 to choose the
period time unit.
u

~


Range
Period time
1ms~500s
Default
10ms
Note
Burst period is only applicable for internal triggers.
Burst period settings are ignored when using gated
burst mode or for external and manual triggers.
The burst period must be large enough to satisfied the
condition below:
Burst Period>Burst Count/Wave frequency + 200ns.