User Manual Manual

MODULATION
125
Burst Phase
Burst Phase defines the starting phase of the burst waveform. The
default is 0˚.
Panel Operation
1. Press the Burst key.

2. Press F1 (N Cycle).
yl

3. Press F3 (Phase).
has

4. The Phase parameter will become highlighted
in the Waveform Display area.
5. Use the arrow keys and scroll
wheel or number pad to enter
the phase.

/


 



6. Press F2 (Degreee) to select
the phase unit.
r

Range
Phase
-360˚~+360˚
Default
0˚