User Manual Manual

CHANNEL SETTINGS
143
CHANNEL SETTINGS
The channel settings chapter shows how to set the output
impedance, output phase and DSO connection settings.
Output Impedance ............................................................. 143
Selecting the Output Phase ............................................... 144
Synchronizing the Phase .................................................... 145
DSO Link ............................................................................ 146
Output Impedance
Background
The AFG-2225 has selectable output impedances:
50Ω or high impedance. The default output
impedance is 50Ω. The output impedances are to
be used as a reference only. If the actual load
impedance is different to that specified, then the
actual amplitude and offset will vary accordingly.
Panel Operation
1. Press the CH1/CH2 key.

Note
The load function can only be used if the ARB, MOD,
SWEEP or BURST functions are not active.
2. Press F1 (Load).
oad
