User Manual Manual

REMOTE INTERFACE
195
*OPC?
System Query
Description
Returns the OPC bit to the output buffer when all
pending operations have completed. I.e. when the
OPC bit is set.
Note
Commands cannot be executed until the *OPC?
query has completed.
Query Syntax
*OPC?
Return parameter
1
Example
*OPC?
1
Returns a “1” when all pending operations are
complete.
*WAI
System Command
Description
This command waits until all pending operations
have completed before executing additional
commands. I.e., when the OPC bit is set.
Note
This command is only used for triggered sweep
and burst modes.
Syntax
*WAI