User Manual Manual

AFG-2225 Series User Manual
256
Syntax
SOURce[1|2]: BURSt:TRIGger:DELay
{<seconds>|MINimum|MAXimum}
Parameter
<seconds>
0~655350 nS
Example
SOUR1:BURS:TRIG:DEL +1.0000E+01
Sets the trigger delay to 10 seconds.
Query Syntax
SOURce[1|2]:BURSt:TRIGger:DELay?
[MINimum|MAXimum]
Return Parameter
<NRf>
Delay in seconds
Example
SOUR1:BURS:TRIG:DEL ?
+1.0000E+01
The trigger delay is 10 seconds.
SOURce[1|2]:BURSt:TRIGger:SLOPe
Source Specific
Command
Description
Sets or queries the trigger edge for externally
triggered bursts from the Trigger INPUT terminal
on the rear panel. By default the trigger is rising
edge (Positive).
Syntax
SOURce[1|2]:BURSt:TRIGger:SLOPe
{POSitive|NEGative}
Parameter
POSitive
rising edge
NEGative
falling edge
Example
SOUR1:BURS:TRIG:SLOP NEG
Sets the trigger slope to negative.
Query Syntax
SOURce[1|2]:BURSt:TRIGger:SLOPe?
Return Parameter
POS
rising edge
NEG
falling edge
Example
SOUR1:BURS:TRIG:SLOP ?
NEG
The trigger slope is negative.