User Manual Manual

AFG-2225 Series User Manual
258
Manual
A >1 ms pulse is output at the
start of each burst.
Syntax
SOURce[1|2]:BURSt:OUTPut:TRIGger:SLOPe
{POSitive|NEGative}
Parameter
POSitive
Rising edge.
NEGative
Falling edge.
Example
SOUR1:BURS:OUTP:TRIG:SLOP POS
Sets the trigger output signal slope to positive
(rising edge).
Query Syntax
SOURce[1|2]:BURSt:OUTPut:TRIGger:SLOPe?
Return Parameter
POS
Rising edge.
NEG
Falling edge.
Example
SOUR1:BURS:OUTP:TRIG:SLOP?
POS
The trigger output signal slope to positive.
OUTPut[1|2]:TRIGger
Source Specific
Command
Description
Sets or queries the trigger output signal on or off.
By default the signal is disabled. When enabled, a
TTL compatible square wave is output.
Syntax
OUTPut[1|2]:TRIGger {OFF|ON}
Parameter
OFF
Turns the output off.
ON
Turns the output on.
Example
OUTP1:TRIG ON
Turns the output on.
Query Syntax
OUTPut[1|2]:TRIGger?
Return Parameter
0
Disabled
1
Enabled
Query Example
OUTP1:TRIG?
1