User Manual Manual

AFG-2225 Series User Manual
268
SOURce[1|2]:PHASe:SYNChronize
Instrument
Command
Description
Sychronizes the phase of channel 1 and channel 2.
SOURce1 or SOURce2 has not effect on this
command.
Syntax
SOURce[1|2]:PHASe:SYNChronize
Example
SOURce1:PHASe:SYNChronize
Synchronizes the phase of channel 1 and channel 2.
COUPLE
The Couple commands can be used to remotely set the frequency
coupling and amplitude coupling.
SOURce[1|2]:FREQuency:COUPle:MODE
Instrument
Command
Description
Set the frequency coupling mode.
Syntax
SOURce[1|2]:FREQuency:COUPle:MODE
{Off|Offset|Ratio}
Example
SOURce1:FREQuency:COUPle:MODE Offset
Sets the frequency coupling mode to offset.
Query Syntax
SOURce[1|2]:FREQuency:COUPle:MODE？
Return Parameter
Off
Disables frequency coupling.
Offset
Set frequency coupling to offset mode.
Ratio
Sets frequency coupling to ratio mode.
Example
SOURce1:FREQuency:COUPle:MODE？
Off
Frequency coupling is turned off.