PANEL INTRODUCTION 2 4 3 1 5 AFG-3032/3022 6 1. TFT LCD Panel 8 2. Number Panel 7 9 3. Scroll Knob & Selection Key 4. Power Switch 5. Output Terminals 6. Main Output Switch 7. Function Keys 8. Operation Keys 12 13 9. USB Host 10. Trigger & Modulation Input 11. 10MHz REF Input & Output 14 15 12. Fan 13. GPIB 11 10 14. LAN 15. USB Device 2 4 3 1 5 AFG-3031/3021 6 1. TFT LCD Panel 8 2. Number Panel 7 3. Scroll Knob & Selection Key 9 4. Power Switch 5. Output Terminals 6.
GW Instek AFG-3000 Series arbitrary function generators include 20MHz/30MHz single isolated channel and 20MHz/30MHz dual isolated channel models, designed to meet industry, scientific research, and education applications. Not only output channel is earth ground isolation, dual channel models are also independently earth ground isolation, which is suitable for floating circuits (up to ±42V).
C. HARMONIC SIGNAL GENERATOR Harmonic Signal Generator D. Harmonic Signal Harmonic signal generator simulates the harmonic signal of switching power supplies and conducts characteristics tests on EMI power filter. Users can set order number and phase for harmonic signals to obtain desired signals. The following diagrams show 8th harmonic signal. E. PULSE GENERATOR Pulse Generator Pulse Signal The output frequency for pulse reaches 25 MHz and its duty cycle is from 0.017% to 99.983%.
G. MODULATION FUNCTION Amplitude Modulation Frequency Modulation Phase Modulation Frequency-shift Keying Modulation Pulse Width Modulation Sum Modulation The series supports AM, FM, PM, FSK, PWM and SUM modulation. Modulation source can be from inside or outside. H.
J. FLEXIBLE ARBITRARY WAVEFORM EDITING Four methods to obtain arbitrary waveforms Front Panel Operation CSV file Upload Supports CSV file Via single unit's panel, arbitrary waveforms can be selected, edited, stored, recalled, output, triggered from 65 built-in waveforms.
SPECIFICATIONS AFG-3031 CHANNELS FEATURES ARBITRARY WAVEFORMS I/O Signal Ground for the Instrument Chassis Each of the Signal Ground of CH1/CH2 Standard Waveforms Sample Rate Repetition Rate Waveform Length Amplitude Resolution Non-Volatile Memory User define Output Section Trigger Built-in Arbitrary Waveforms AFG-3032 AFG-3021 AFG-3022 1 2 1 2 Connector shells for channel output(s), Sync output, 10MHz REF Input, Mod Input and Mod output are isolated from the instrument's chassis.
SPECIFICATIONS AFG-3031 ADDITIVE MODULATION (SUM) FSK SWEEP BURST AFG-3032 AFG-3021 DC ~ 30 MHz Internal / External Sine, Triangle, Ramp, Pulse, Noise Sine, Square, Triangle, Up/Dn Ramp 0% ~ 100% of carrier amplitude, 0.