User Manual

GDS-3000 Power Analysis User Manual
24
Choosing a Harmonic Standard Test
Panel operation
1. Press the Test key.
2. Press Power Analysis from the
bottom menu.
3. Press Harmonics from the side
menu.
4. Press Test to Standard from the
lower menu.
5. Choose the desired Test Standard
from the side menu.
Standard
None, IEC 61000-3-2
Harmonics Setup – Default (None)
Background
The setup menu depends entirely on the test
standard chosen. If no test standard is chosen the
default harmonics setup is used.
Panel operation
1. Press the Test key.
2. Press Power Analysis from the
bottom menu.
3. Press Harmonics from the side
menu.