User Manual

MEASUREMENT
25
4. Press Setup from the lower menu.
5. Set the Number of Harmonics from
the side menu.
Range
20-~400
6. Choose the Harmonics Source.
Source
V, I
7. Set the Frequency Reference.
Reference
V, I, Harmonics source, Fixed
8. If Fixed was set as the frequency
reference, set the Fixed Reference
frequency.
Reference
10Hz~400Hz
Harmonics Setup – IEC
Background
The following Setup menu is only applicable when
IEC is chosen as the testing standard. See page 24
for details.
Panel operation
1. Press the Test key.
2. Press Power Analysis from the
bottom menu.