Manual

GBS-1000 Programming Manual
30
Data Log Commands
:DATALOG:STATE ....................................................... 30
:DATALOG:SOURce .................................................... 30
:DATALOG:SAVe ......................................................... 31
:DATALOG:INTerval .................................................... 31
:DATALOG:DURation .................................................. 31
:DATALOG:STATE
Set
Query
Description
Turns the datalogging function on/off.
Same as: Utility key → More (F5) → More (F5) →
Data Logging Menu(F3)→Data Logging (F1).
Syntax
< Long >
< Short >
:DATALOG:STATE {0|1}
:DATALOG:STATE?
:DATALOG:STATE
{0|1}
:DATALOG:STATE?
Parameter/
Return parameter
0
Off. Stop data logging function.
1
On. Start data logging function.
Example
:DATALOG:STATE 1
Turn data logging on.
:DATALOG:SOURce
Set
Query
Description
Sets or queries the data logging source channel.
Syntax
< Long >
< Short >
:DATALOG:SOURce{1|2|3|4|5}
:DATALOG:SOURce?
:DATALOG:SOUR{1|2|
3|4|5}
:DATALOG:SOUR?
Parameter/
Return parameter
1
Sets CH1 as the source channel
2
Sets CH2 as the source channel
3
Sets CH3 as the source channel