User Manual Owner manual

CONFIGURATION

121

Example

BW Limit Off

BW Limit On

Select probe attenuation level

Background

A signal probe has an attenuation switch to lower

the original DUT signal level to the oscilloscope

input range, if necessary. The probe attenuation

selection adjusts the vertical scale so that the

voltage level on the display reflects the real value

on DUT.

Panel operation

1. Press the Channel key.

CH1

2. Press F4 (Probe) repeatedly

to select the attenuation

level.

Probe

F 4

3. The voltage scale in the

channel indicator changes

accordingly. There is no

change in the waveform

shape.

(x1)

(x10)

(x100)

Range

x1, x10, x100

Note

The attenuation factor adds no influence on the

real signal. It just changes the voltage scale on the

display.