User Manual Owner manual

GBS-1000 Series User Manual
82
Auto
Creates the upper and lower boundary
from an input signal, not from an
internally stored waveform.
Advantage: No need to store the
waveforms prior to this selection.
Disadvantage: The template shape is
proportional to the source signal. The
distance (allowance) between the source
signal and upper/lower template are
always symmetrical.
Min/Max setting
1. Make sure the source signal, on which the
templates are based, appears on the display.
2. Press the Utility key.
Utility
3. Press F5 (More).
More
F 5
4. Press F3 (Go-NoGo Menu).
Go-NoGo
Menu
F 3
5. Press F1 (Template Edit).
Template
Edit
F 1
6. Press F1 (Template)
repeatedly to select the
upper (Max) or lower (Min)
boundary template.
Template
Max
F 1
7. Press F2 (Source). Use the
Variable knob to select the
template from an internally
stored waveform. For the
waveform store procedure,
see page147.
Source
RefA
F 2