User Manual Owner manual

MEASUREMENT
95
Run Data logging
Background
Ensure the data source (page 93) and data logging
setup has been set (page 93).
Procedure
1. Insert a USB flash drive into
the USB front panel port.
2. Press the Utility key.
Utility
3. Press F5 (More) twice.
More
F 5
x2
4. Press F3 (Data Logging).
Data
Logging
F 3
5. Press F1 (Data Log) to turn
data logging On.
Data/image files start
logging to the USB flash
drive automatically. To stop
the data logging, press F2
(Data Log) again.
F 2
Data log
On