User Manual Owner's manual

SYSTEM/DISPLAY CONFIGURATION
63
Filter setting
Turn on Filter
1. Press the Shift key followed by
the MX/MN (Filter) key.
1st display
Shows the filter count
2nd display
Shows the filter type (flashing)
2. Select the filter type using the
Up/Down key.
3. Move the cursor to filter count
using the Left/Right key.
Change the value using the
Up/Down key.
4. Press the ENTER key to
confirm editing. The Filter
indicator appears on the display.
FILT
Indicates manual Filter setting
Turn off Filter
1. Press the Shift key followed by
the MX/MN (Filter) key. The
Filter indicator will disappear
from the display.