User Manual

ManualsBrandsGW Instek ManualsDigital Multimeters - BenchBenchtop Multimeter, TRMS AC + DC, 100Ohm ... 100MOhm

SYSTEM/DISPLAY CONFIGURATION

63

Filter setting

Step

1. Press the Shift key followed by

the MX/MN (Filter) key.

1st display

Shows the filter count

2nd display

Shows the filter type (flashing)

2. Select the filter type using the

Up/Down key.

3. Move the cursor to filter count

using the Left/Right key.

Change the value using the

Up/Down key.

4. Press the ENTER key to

confirm editing. The Filter

indicator appears on the display.

FILT

Indicates manual Filter setting