User Manual

ManualsBrandsGW Instek ManualsDigital Multimeters - BenchBenchtop Multimeter, TRMS AC + DC, 100Ohm ... 100MOhm

SCANNER (OPTIONAL)

81

6. Move the cursor to the channel

using the Left/Right key, and

change the value using the

Up/Down key.

Range

101 ~ 118, 201 ~ 218 (must be the same

or bigger than the Start (Min) channel)

7. When finished, press the

ENTER key. The Timer setting

appears.

8. Move the cursor to the channel

using the Left/Right key, and

change the value using the

Up/Down key.

Range

1ms ~ 9999ms

9. Press the ENTER key. The loop

(step) Count setting appears.

10. Move the cursor to the channel

using the Left/Right key, and

change the value using the

Up/Down key.

Range

1 ~ 999

11. Press the ENTER key followed

by the EXIT key. The setting is

stored and the display goes back

to the normal mode.