User Manual

DIGITAL I/O
91
Application: Compare measurement
Applicable to
Background
Compare measurement checks and updates if the
measurement data stays between the upper (high) and
lower (low) limit specified.
1. Activate
Compare
measurement
Press the Shift key, then the HOLD
(Comp) key.
2. High limit
setting
1st display
Shows the high limit value
2nd display
Indicates high limit setting
1. Use the Left/Right key to move
the cursor (flashing point)
between high/low setting, digits,
and decimal point.
2. Change the parameter using the
Up/Down key.
3. Press the ENTER key to
confirm editing and move to the
low limit setting.
3. Low limit
setting
1st display
Shows the low limit value
2nd display
Indicates low limit setting