User Manual

GDM-8200A Series User Manual
92
Set the low limit in the same way as
in the high limit. Press the ENTER
key to confirm editing. The compare
measurement starts right away.
4. Compare
measurement
appears
COMP
Indicates Compare mode
2
nd
display
Shows the compare measurement result:
Pass, High, or Low.
5. Result High
If the 2
nd
display shows
High, the result is above
the High limit.
Digital I/O: FAIL Out (Pin 6) and
HIGH Limit FAIL Out (Pin 7) are
activated.
Low
If the 2
nd
display shows
Low, the result is below
the Low limit.
Digital I/O: FAIL Out (Pin 6) and LOW
Limit FAIL Out (Pin 8) are activated.
Pass
If the 2
nd
display shows
Pass, the result is staying
between the High and the
Low limit.
Digital I/O: PASS Out (Pin 5) is
activated.
Deactivate
Compare
measurement
To cancel the Compare
measurement, press the Shift key
followed by the HOLD (Comp) key,
or simply activate another
measurement.