User manual Manual

REMOTE CONTROL
135
Configuration
1. Press the Shift key, the 2nd
(Menu) key, the left key
repeatedly until the TX TERM
configuration menu appears.
/ EXITSHIFT
2ND
MENU
HOLD
2. Press the Down key. The EOL
menu appears.
3. Press the Down key. The EOL
selection menu appears.
4. Press the Up/Down key to
select the EOL character.
 
5. Press the Enter key followed by
the Exit key. The EOL setting is
stored and the display goes back
to the default display.
AUTO
ENTER
/ EXITSHIFT
Set the Separation Character
Description
The TX TERM configuration menu can set the
separation character for multiple return measurement
values, the GPIB’s separation character is fixed as a
comma. While the separation character for LAN can be
either CR+LF or a comma.