User manual Manual

BASIC MEASUREMENT
29
The DC voltage range should be manually selected when
any of the following conditions are true:
1. When DCV measurement is used.
2. When the signals being measured contain both DC
and AC components.
3. When the amplitude of the AC component in the
measured signal is higher or lower than the dynamic
range of the range being currently selected by
auto-range function.
DCV Voltage
Range Selection
List
DCV Range
ADC Dynamic Range
DC100mV
max±200mV
DC1V
max±2V
DC10V
max±20V
DC100V
max±200V
DC1000V
max±1000V