User manual Manual

SYSTEM/DISPLAY CONFIGURATION
81
2. Select the filter type using the
Up/Down key.
 
3. Move the cursor to filter count
using the Left/Right key.
Change the value using the
Up/Down key.
HOLD TRIG
Set Filter Window
threshold
4. Press the Enter key to confirm
editing.
AUTO
ENTER
5. Select the Window threshold
using the Up/Down key. The
display changes accordingly.
Range
None, 0.01%, 0.1%, 1%, 10%
6. Press the Enter key to confirm
editing. The Filter indicator
appears on the display.
AUTO
ENTER
Vm
SDC
FILT
FILT
Indicates manual Filter setting
Turn off Filter
Press the Shift key followed by the
MX/MN (Filter) key. The Filter
indicator will disappear from the
display.
/ EXITSHIFT
MX/MN
FILTER