User manual

ManualsBrandsGW INSTEK ManualsTest & MeasurementBench multimeter digital CAT II 600 V Display (counts): 50000

COMMAND OVERVIEW

109

[MIN] (Optional

parameter)

For commands, this will set the

setting to the lowest value. This

parameter can be used in place of

any numerical parameter where

indicated.

For queries, it will return the

lowest possible value allowed for

the particular setting.

[MAX] (Optional

parameter)

For commands, this will set the

setting to the highest value. This

parameter can be used in place of

any numerical parameter where

indicated.

For queries, it will return the

highest possible value allowed

for the particular setting.

Automatic

parameter range

selection

The GDM-8342/8341 automatically sets the

command parameter to the next available value.

Example

conf:volt:dc 1

This will set the measurement

item to DC Voltage and the range

to 5V. There is no 1V range so the

DMM selects the next available

range, 5V.

Message

Terminator (EOL)

Remote

Command

Marks the end of a command

line. The following messages are

in accordance with IEEE488.2

standard.

LF, CR, CR+LF

The most

common EOL

character is

CR+LF