Manual

GDS-1000-U Programming Manual
14
Acquisition Command
:ACQuire:AVERage ...................................................... 14
:ACQuire:MODe .......................................................... 14
:ACQuire<X>:MEMory................................................. 15
:ACQuire:AVERage
Set
Query
Description
Selects or returns the average number of waveform
acquisitions that are used in the average
acquisition mode.
Same as: Acquire key → F2
Syntax
< Long >
< Short >
:acquire:average <NR1>
:acquire:average?
:acq:aver <NR1>
:acq:aver?
Parameter
<NR1>
Average No.
<NR1>
Average No.
1
2
5
32
2
4
6
64
3
8
7
128
4
16
8
256
Note
Before using this command, select the average
acquisition mode. See the example below.
Example
:acquire:mode 2
:acquire:average 2
Selects the average
acquisition mode, and
select the average
number 4
:ACQuire:MODe
Set
Query
Description
Selects or returns the acquisition mode.
Same as: Acquire key → F1 ~ F3