Manual

COMMAND DETAILS
25
Parameter
<X>
Horizontal or vertical cursor
x
Horizontal cursor (X axis)
y
Vertical cursor (Y axis)
Note
The returned data format is <NR3> as follows.
CH1, CH2, Math (CH1±CH2): time (s) for
horizontal cursor, voltage (V) for vertical cursor
Math (FFT): frequency (Hz) for horizontal cursor,
decibel (dB) for vertical cursor
Example
:channel:math 3
:cursor:xdisplay 1
:cursor:xdelta?
→ 2.500E+03
Returns the frequency
(2500Hz) between the
two horizontal cursors
in the Math FFT mode
:channel:math 3
:cursor:ydisplay 1
:cursor:ydelta?
→ 2.500E+00
Returns the decibel
(2.5dB) between the
two vertical cursors in
the Math FFT mode
:CURSor:<X>DISplay
Set
Description
Turns the horizontal or vertical cursors on/off.
Same as: Cursor key
Syntax
< Long >
< Short >
:cursor:y<X>display <Boolean>
:curs:y<X>dis
<Boolean>
Parameter
<X>
X or Y cursor
<NR1>
Cursor on/off
x
X (horizontal)
0
off
y
Y (vertical)
1
on
Example
:cursor:ydisplay 1
Turn Y cursor on