Manual

GDS-1000-U Programming Manual
32
:MEASure:FREQuency
Query
Description
Returns the frequency value.
Same as: Measure key → F1~F5 → F3 (Frequency)
Syntax
< Long >
< Short >
:measure:frequency?
:meas:freq?
Returns
<NR3>
Note
Before using this command, select the
measurement channel. See the example below.
Example
:measure:source 1
:measure:frequency?
Selects Channel 1, and
then measures the
frequency.
:MEASure:NWIDth
Query
Description
Returns the first negative pulse width timing.
Same as: Measure key → F1~F5 → F3 (–Width)
Syntax
< Long >
< Short >
:measure:nwidth?
:meas:nwid?
Returns
<NR3>
Note
Before using this command, select the
measurement channel. See the example below.
Example
:measure:source 1
:measure:nwidth?
Selects Channel 1, and
then measures the
negative pulse width.
:MEASure:PDUTy
Query
Description
Returns the positive duty cycle ratio.
Same as: Measure key → F1~F5 → F3 (DutyCycle)
Syntax
< Long >
< Short >