Manual

GDS-1000-U Programming Manual
36
Syntax
< Long >
< Short >
:measure:vamplitude?
:meas:vamp?
Returns
<NR3>
Note
Before using this command, select the
measurement channel. See the example below.
Example
:measure:source 1
:measure:vamplitude?
Selects Channel 1, and
then measures the rise
Voltage amplitude.
:MEASure:VAVerage
Query
Description
Returns the average voltage.
Same as: Measure key → F1~F5 → F3 (Vavg)
Syntax
< Long >
< Short >
:measure:vaverage?
:meas:vavg?
Returns
<NR3>
Note
Before using this command, select the
measurement channel. See the example below.
Example
:measure:source 1
:measure:vaverage?
Selects Channel 1, and
then measures the
average Voltage.
:MEASure:VHI
Query
Description
Returns the global high voltage.
Same as: Measure key → F1~F5 → F3 (Vhi)
Syntax
< Long >
< Short >
:measure:vhi?
:meas:vhi?
Returns
<NR3>
Note
Before using this command, select the
measurement channel. See the example below.