Manual

GDS-1000-U Programming Manual
44
Note
Before any Go-NoGo command can be used,
please use the :GONogo:FUNCtion 1 command to
initialize the oscilloscope.
Syntax
< Long >
< Short >
:TEMPlate:MODe {0|1}
:TEMPlate:MODe?
:TEMP:MOD {0|1}
:TEMP:MOD?
Parameter/
Return parameter
0
Select Normal template mode.
1
Select Auto template mode.
Example
:TEMP :MOD 1
Set to Auto mode.
:TEMPlate:MAX
Set
Query
Description
Sets or queries the template used for the MAX
boundary (W1~W15, RefA).
Note
A template can only be defined for the MAX or
MIN template, not both.
Before this command can be used, please set the
template mode to normal using
the :TEMPlate:MODe 0 command.
Before any Go-NoGo command can be used,
please use the :GONogo:FUNCtion 1 command to
initialize the oscilloscope.
Syntax
< Long >
< Short >
:TEMPlate:MAX <NR1>
:TEMPlate:MAX?
:TEMP:MAX <NR1>
:TEMP:MAX?
Parameter/
Return parameter
0
Set RefA as the MAX template.
1~15
Set W1 ~ W15 as the MAX template
Example
:TEMP :MAX ?
>1
RefA is the template.