Manual

COMMAND DETAILS
45
:TEMPlate:MIN
Set
Query
Description
Sets or queries the template used for the MIN
boundary (W1~W15, RefB).
Note
A template can only be defined for the MAX or
MIN template, not both.
Before this command can be used, please set the
template mode to normal using
the :TEMPlate:MODe 0 command.
Before any Go-NoGo command can be used,
please use the :GONogo:FUNCtion 1 command to
initialize the oscilloscope.
Syntax
< Long >
< Short >
:TEMPlate:MIN <NR1>
:TEMPlate:MIN?
:TEMP:MIN <NR1>
:TEMP:MIN?
Parameter/
Return parameter
0
Set RefB as the MIN template.
1~15
Set W1 ~ W15 as the MIN template
Example
:TEMP :MIN ?
>1
RefB is the template.
:TEMPlate:POSition:MAX
Set
Query
Description
Sets and queries the position of the MAX template
in grid divisions. 1 grid division = 25 on-screen
pixels.