Manual

GDS-1000-U Programming Manual
66
:TRIGger:REJect
Set
Query
Description
Selects the trigger rejection filter.
Same as: Trigger key → F4 → F3
Syntax
< Long >
< Short >
:trigger:reject <NR1>
:trigger:reject?
:trig:rej <NR1>
:trig:rej?
Parameter
<NR1>
Rejection filter
0
off
1
LF
2
HF
Note
Before using this command, select the edge or
pulse trigger. See the example below.
Example
:trigger:type 0
:trigger:reject 1
Selects the edge trigger
and LF rejection filter
:TRIGger:SLOP
Set
Query
Description
Selects the trigger slope.
Same as: Trigger key → F4 → F1
Syntax
< Long >
< Short >
:trigger:slop <NR1>
:trigger:slop?
:trig:slop <NR1>
:trig:slop?
Parameter
<NR1>
Trigger slope
0
+ (positive)
1
– (negative)
Note
Before using this command, select the edge or
pulse trigger. See the example below.