User Manual

GDS-1000A-U Series User Manual
104
Rear Panel USB Port Interface
The USB slave port on the rear panel can be set to auto detect,
however occasionally the USB host type cannot be detected. The
USB Port function allows the USB host type to be manually or
automatically set for the rear panel.
USB connection PC / Printer end
Type A, host
GDS-1000A-U end
Type B, slave
Speed
1.1/2.0 (full speed)
Procedure
1. Connect the USB cable to
the USB slave port on the
GDS-1000A-U.
2. Insert the other end of the
USB cable into the PC or
Printer USB port.
3. Press the Utility key.
Utility
4. Press More twice.
x2
5. Press USB Port repeatedly to
set the host device .
Range
Printer, PC, Auto Detect