Manual

GDS-2000 Series Training Manual

2. Set up the Environment

Here you will learn how to setup measurement environment: select

the menu language, reset GDS-2000, and adjust the display contrast.

1. Press the Utility key → F4 (Language). Press F4 repeatedly to

select the menu language of your choice.

Utility

Language

English

F 4

2. Press the Save/Recall key → F1 (Default Setup) to reset GDS-

2000 front panel. Make sure that Channel1 becomes active (CH1

key LED turns ON) and a horizontal line appears at the center.

Save/Recall

Default

Setup

F 1

3. Go to the next step.

Note:

 For a complete list of the default setup contents, see Quick

Reference → Default Settings in GDS-2000 user manual.

 You can also activate the channel manually by pressing

the CH key.

 If the display is too dark or bright, press the Display key

→ F4 (Contrast) and use the VARIABLE knob to adjust

the contrast.

Display

Contrast

F 4

VARIABLE