Manual

GDS-2000 TUTORIAL
13
3. Connect and View a Waveform
Here you will learn how to connect the probe and automatically
adjust the display scale.
1. Select x10 as the sensitivity on the probe to limit the input signal
amplitude.
2. Connect the probe between Channel1 input terminal and probe
compensation output terminal.
X10
X
1
3. Press the Auto Set key. The probe compensation signal
waveform appears on the display.
Auto Set
4. Go to the next step.
Note:
If you want to undo Auto Set, press F5 (Undo Autoset)
while the menu is available (approximately 5 seconds).