Manual

GDS-2000 Series Training Manual
14
4. Measure the Waveform
Here you will learn how to automatically measure the voltage,
frequency, and timing of the signal waveform.
1. Press the Measure key. GDS-2000 automatically measures five
major attributes of input signal and displays them in the menu.
Measure
2. Press the Measure key again, then F1 (CH1). The voltage,
frequency, and timing of CH1 waveform appear on the display.
Measure
CH1
F 1
3. Press F5 (OFF) to cancel measurement and reset the display.
OFF
F 5
4. Go to the next step.
Note:
You can also measure the waveform using the Cursor
function. For details, see Measurement → Automatic
Measurement and Cursor Measurement in the user manual.