Manual

GDS-2000 TUTORIAL

5. Adjust Waveform Scale and Position

Here you will learn how to manually change the horizontal and

vertical scale and move the waveform position.

1. Turn the TIME/DIV knob clockwise by one

notch to change the horizontal scale to

100us/div.

TIME/DIV

2. Turn the horizontal POSITION knob counter-

clockwise, until the waveform edge moves

three divisions to the left.

POSITION

3. Turn the Channel1 VOLTS/DIV knob

clockwise by one notch to change the vertical

scale to 20mV/div.

VOLTS/DIV

4. Turn the vertical POSITION knob counter-

clockwise, until the waveform edge is located at

two divisions above the center.

POSITION

5. Go to the next step.

Note:

For details, see Configuration → Horizontal View and

Vertical View in the user manual.