User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
85
6. Pressing the cursor window will toggle the
horizontal reading between frequency and
time.
Cursor
Reading
Moving the
Cursors
7. To move the cursors horizontally, touch and
swipe a cursor line horizontally to the desired
position.
8. To move the cursors vertically, touch and swipe
a cursor line vertically to the desired position.
Horizontal
cursor
Vertical
cursor
9. Return the Gesture Control back to Waveform
after the cursors have been positioned. See step
2 above.