User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
COMMAND DETAILS
29
Parameter
SAMPle
Sample mode sampling
PDETect
Peak detect sampling
AVERage
Average sampling mode
Example
:ACQuire:MODe PDETect
Sets the sampling mode to peak detection.
:ACQuire<X>:MEMory?
Description
Returns the data in acquisition memory for the
selected channel as a header + raw data.
Syntax
:ACQuire<X>:MEMory?
Related
Commands
ACQuire:RECOrdlength
:HEADer
Parameter
<X>
Channel number (1 to 2)
Example
:ACQuire1:MEMory?
Format,0.20;Memory Length,
10000;IntpDistance,0;Trigger Address,5229;Trigger
Level,4.000E-01;Source,CH1;Vertical Units,V;
Vertical Units Div,0;Vertical Units Extend Div,15;
Label, ;Probe Type,0;Probe
Ratio,1.000e+00;Vertical Scale,2.000e+00;Vertical
Position,3.600e-00;Horizontal Units,S;Horizontal
Scale,5.000E-04;Horizontal Position,0.000E+00;
Horizontal Mode,Main;SincET Mode,Real
Time;Sampling Period,4.000e-07;Horizontal Old
Scale,5.000E-04;Horizontal Old Position,0.000E+00;
Firmware,V0.42;Time,05-May-14 12:25:17;
Waveform Data;<LF>#520000 <Raw Data><LF>
:ACQuire<X>:STATe?
Description
Returns the status of waveform data.
Syntax
:ACQuire<X>:STATe?
Query
Query