User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
APPENDIX
183
Display
Type
7 Inch
Display Resolution
480 x 800
Display Orientation
Landscape and Portrait
Backlight Control
Manual adjustable & ECO mode
Touch Panel
Capacitive
Power Adapter
Line Voltage
AC 100V-240V, 47-63Hz, Power Consumption 40W
DC Output
12V/3A, double shielded wire cable
Dimensions and Weight
Weight
1.5kg
Dimensions
HxWxD(mm) 240.2mm x 136.0mm x 59.7 mm
DMM Specifications
Basic
Reading
50,000 counts, 4½ digits (GDS-307/310/320)
3½ digits (GDS-207/210/220)
Voltage Input
CAT II 600VRMS, CAT III 300VRMS
DC Voltage
Range
50mV, 500mV, 5V, 50V, 500V, 1000V, 6 ranges
Accuracy
GDS-307/310/320: 50mV, 500mV, 5V, 50V, 500V ±(0.05% +
5 digits), 1000V ±(0.1% + 5 digits)
GDS-207/210/220: 50mV, 500mV, 5V, 50V, 500V, 1000V
±(0.1% + 5 digits)
Input Impedance
10MΩ
DC Current
Range
50mA, 500mA, 10A, 3 ranges
Accuracy
GDS-307/310/320: 50mA - 500mA, 2 Ranges, ±(0.1% + 5
digits), 10A ±(0.5% + 1 digits)
GDS-207/210/220: 50mA - 500mA, 10A 3 Ranges, ±(0.5% +
1 digits)