User manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
45
Set the Horizontal Scale
Background
The touch screen can be used to conveniently set
the horizontal scale of the displayed waveforms.
To set other horizontal scale options, see page 60.
Steps
Pinch in/out horizontally to set the horizontal
scale of the display.
A scale indicator will popup to show the current
scale in relation to full horizontal scale range.
When the scale indicator appears, simply tapping
the left or right-half of the screen will also change
the horizontal scale.
The horizontal scale (as a value) is shown in the
bottom left-hand side of the display.
Example
Horizontal
indicator
Horizontal
Scale