User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
GDS-200 & GDS-300 Programming Manual
114
:BRIEF:VERTical
Description
Adds vertical information to the image file that is
saved when Brief mode is on.
Syntax
:BRIEF:VERTical {ON | OFF | ?}
Related
commands
:SAVe:IMAGe
Parameter/
Return parameter
ON
Adds vertical information for Brief mode
OFF
Turns off vertical information from Brief
mode
Example
:BRIEF:VERTical ON
Adds vertical information to Brief mode.
:BRIEF:HORizontal
Description
Adds horizontal information to the image file that
is saved when Brief mode is on.
Syntax
:BRIEF:HORizontal {ON | OFF | ?}
Related
commands
:SAVe:IMAGe
Parameter/
Return parameter
ON
Adds horizontal information for Brief
mode
OFF
Turns off horizontal information from
Brief mode
Example
:BRIEF:HORizontal ON
Adds horizontal information to Brief mode.
:BRIEF:TRIGger
Description
Adds trigger information to the image file that is
saved when Brief mode is on.
Syntax
:BRIEF:TRIGger {ON | OFF | ?}
Set
Query
Set
Query
Set
Query