User manual
Table Of Contents
- INTERFACE OVERVIEW
- COMMAND OVERVIEW
- COMMAND DETAILS
- Common Commands
- Acquisition Commands
- Autoscale Commands
- Vertical Commands
- Math Commands
- Cursor Commands
- Display Commands
- Hardcopy Commands
- Measure Commands
- Measurement Commands
- Reference Commands
- Run Command
- Stop Command
- Single Command
- Force Command
- Utility Commands
- Timebase Commands
- Trigger Commands
- System Commands
- Save/Recall Commands
- Go_NoGo Commands
- Replay Commands
- Rotate Commands
- DMM Commands
- APPENDX
- INDEX
COMMAND DETAILS
87
Reference Commands
:REF<X>:DISPlay ......................................................... 87
:REF<X>:TIMebase:POSition ..................................... 87
:REF<X>:TIMebase:SCALe ......................................... 88
:REF<X>:OFFSet ......................................................... 88
:REF<x>:SCALe ........................................................... 89
:REF<X>:DISPlay
Description
Sets or queries a reference waveform to be shown
on the display. A reference waveform must first be
saved before this command can be used.
Syntax
:REF<x>:DISPlay { OFF| ON| ? }
Parameter
<X>
Reference waveform 1, 2
OFF
Turns the selected reference
waveform off
ON
Turns the selected reference
waveform on
Return parameter
Returns the status of the selected reference
waveform. (OFF, ON)
Example
:REF1:DISPlay ON
Turns on reference1 (REF 1) on the display.
:REF<X>:TIMebase:POSition
Description
Sets or returns the selected reference waveform
time base position.
Syntax
:REF<X>:TIMebase:POSition { <NRf> | ?}
Related
commands
:REF<X>:DISPlay
Set
Query
Set
Query