User Manual Owner manual

CONFIGURATION
103
X-Y mode is split into two windows. The top window
shows the signals over the full time range. The bottom
window shows XY mode.
To move the X Y waveform position,
use the vertical position knob:
Channel 1 knob moves the X Y
waveform horizontally, Channel 2
knob moves the X Y waveform
vertically. Similarly, the X2 and Y2
axis can be positioned using the
channel 3 and channel 4 vertical
position knobs.
The horizontal position knob and
Time/Div knob can still be used
under the XY mode.
POSITION
Down
Up
Turn Off XY Mode
To turn off XY mode, choose OFF (YT)
mode.
XY Mode
Cursors can be used with XY mode.
See the Cursor chapter for details.
Page 76