User Manual Owner manual

MEASUREMENT
65
Vertical Position/Scale
For more detailed configuration, see page117.
Set Vertical
Position
To move the waveform up or
down, turn the vertical position
knob for each channel.
POSITION
Down
Up
As the waveform moves, the vertical position of
the cursor appears on the display.
Run/Stop
mode
The waveform can be moved
vertically in both Run and Stop
mode.
Select Vertical
Scale
To change the vertical scale,
turn the VOLTS/DIV knob; left
(down) or right (up).
Down
Up
Range
2mV/div ~ 1V/div (50Ω/75Ω)/,
2mV/div ~ 5V/div (1MΩ)
1-2-5 increments
The vertical scale indicator for
each channel on the bottom of
the display changes
accordingly.