User Manual

OPERATION
35
Start Up Procedure
Startup
Background
The power up sequence as well as the
connections between each scanner box and the
safety tester are critical to operate the scanners
correctly.
Steps
1. Make sure the safety tester and all scanner
boxes are turned off.
2. Connect each scanner box to a master safety
tester in a daisy chain, as shown on page 25.
 Make sure the RS232 cables are connected to
the correct ports.
 Make sure the Input and Output cables are
connected properly.
3. Turn on the scanner boxes from the
power switches.
Each power LED will be lit red.
POWER
4. Turn the GPT-9000 power on. It is
essential that the GPT-9000 is turned
on after the scanner boxers.
POWER
Startup Screen
S y s e m t
H a r w a rd
e C h
C h e c i g . .n .
F i r w a rm
e C h
SYS T E S M E L F T E S T
k
e c i g . .n .k
e c i g . .n .k