User Manual

GSB-01/GSB-02 Series User Manual

Configure the Manual Test Settings

Background

After a MANU number has been chosen and

the tester is in EDIT status, the settings for the

current manual test can be configured.

Steps

1. To choose the test function, press the ACW,

DCW, IR or GB soft-keys.

A CW D CW I R

G B

2. The test function soft-key is highlighted.

3. Press the UP / DOWN arrow keys

to bring the cursor to a function

setting.

4. Use the scroll wheel to set the

value of the function setting.

Example

I R G B A CW D CW I / LH O I M ET R

F R E Q = 0 H z 6

100

k V

IDE

MT I E = 0 0 1 . 0 SR

0 0 m AER F =# 0 .0MM A UN N A_

1 . 0 0 m AIH ES = 0T

0 0 . 1 S0A M P =R

2M A N U = * * * - 0 0

cursor

m A

5. Repeat steps 3 and 4 for the remaining settings.

6. Press the EDIT/SAVE key to save

and save the manual test and go

back to VIEW status.

EDIT/SAVE

Note

For detailed instructions on how to set the various

function settings, please see the user manual.