Instruction Manual

GSP-930 Programming Manual
76
:CALCulate:JITTer:PHASe?
Query
Description
Returns the carrier phase jitter in radians.
Query Syntax
:CALCulate:JITTer:PHASe?
Return parameter
<NR3>
Rad
Query Example
:CALC:JITT:PHAS?
>1.5307e+01
:CALCulate:JITTer:TIME?
Query
Description
Returns the carrier jitter time in seconds.
Query Syntax
:CALCulate:JITTer:TIME?
Return parameter
<NR3>
Seconds
Query Example
:CALC:JITT:TIME?
>.5.31e-08
:CALCulate:LIMit<n>:CLEar
Set
Description
Clears the High Limit, Low Limit and the
Pass/Fail state for the selected limit line.
Syntax
:CALCulate:LIMit<n>:CLEar
Parameter
<n>
Selected limit line
Example
:CALC:LIM1:CLE
:CALCulate:LIMit<n>:DATA
Set
Query
Description
Sets or queries the frequency, amplitude limit of
every point in the selected limit line. The data is
stored in CSV format.
There are total of 10 pairs of data points (20 data
entries in total) for the <csv data> data.
Syntax
:CALCulate:LIMit<n>:DATA <csv data>