GSP-9330 3.25 GHz Spectrum Analyzer A. FAST SIGNAL SWEEP TESTS MUST BE FAST! For spectrum analyzer, speed is the most important specification. GSP-9330 provides sweep speed up to 204 ms. Users, via high speed sweep time, can identify and analyze various fast or transient signals such as frequency/amplitude modulation signals, Bluetooth frequency hopping signals, tuned oscillator or other interfering signals under ISM Band. FM Signal Monitoring Taiwan 3G Telecom Signals GSP-9330 (9kHz ~ 3.
GSP-9330 3.25 GHz Spectrum Analyzer C. EMC PRETEST SOLUTION D. GRAPHIC PROCESSING OF SIGNAL MONITORING GSP-9330 has the built-in EMI dedicated 200/9k/120k/1MHz filter, 20dB low noise amplifier and Quasi-Peak/Average detection mode to conduct radiation and conduction tests after collocating with the probe set. GKT-008, the radiation test probe set, provides a complete near field test probe set to simplify the complex measurement procedures and to simulate 3m/10m far field tests from the labs.
GSP-9330 3.25 GHz Spectrum Analyzer E. SIGNAL VERIFICATION, TEST AND ANALYSIS Channel Power Measurement TOI (Third Order Intercept) Telecommunications and broadcasting service carriers will encounter distorted signals caused by adjacent channels' inter-modulation while transmitting modulated signals using communications channels. If the distorted signals are too large the communications quality of adjacent channels will be affected.
GSP-9330 3.25 GHz Spectrum Analyzer F. PRODUCTION LINE APPLICATIONS G. USER FRIENDLY DESIGN Sequence Function Status Icons The sequence function allows users to edit a sequence formulated by a series of steps directly from the instrument. Pause and delay can be inserted in the sequence to observe the test results. There are five sets of sequence for selection. Each sequence allows editing of 20 steps. Different sequence can be interactive and support each other.
GSP-9330 3.25 GHz Spectrum Analyzer I. SOFTWARE SUPPORT J. VARIOUS AUGMENTING OPTIONS PC Software - SpectrumShot Tracking Generator Users can use the external software Spectrum Shot for EMI pretest report management and assessment, remote control and waveform data recording for long periods of time. TG option provides 0 to -50 dBm synchronized sweep output, conducts scalar network analysis (S11. S21) function as well as P1dB.
GSP-9330 3.
GSP-9330 3.25 GHz Spectrum Analyzer SPECIFICATIONS SPECIFICATIONS ABSOLUTE AMPLITUDE ACCURACY Absolute Point Center=160 MHz ; RBW 10 kHz; VBW 1 kHz; span 100 kHz; log scale; 1 dB/div; peak detector; 23°C±1°C; Signal at Reference Level Preamp Off Preamp On ± 0.3 dB ± 0.4 dB FREQUENCY RESPONSE Attenuation : 10 dB; Reference: 160 MHz; 20 ~ 30°C Preamp Off ± 0.5 dB 100 kHz ~ 2.0 GHz ± 0.7 dB 2GHz ~ 3.25 GHz Attenuation: 0 dB; Reference: 160 MHz; 20 ~ 30°C Preamp On ± 0.6 dB 1 MHz ~ 2 GHz 2 GHz ~ 3.
