Brochure

913
14
Good Will Instrument Co., Ltd.
Simply Reliable
Simply ReliableGood Will Instrument Co., Ltd.
3.25 GHz Spectrum Analyzer
GSP-9330
ACCESSORIES :
OPTIONAL ACCESSORIES
OPTIONS
FREE DOWNLOAD
ORDERING INFORMATION
Related Products Information :
GKT-008 Near Field Probe
GLA-5040A LISN
GIT-5060 Isolation Transformer
GPL-5010 Pulse Limiter
GSP-9330
GKT-008
GLN-5040A
GIT-5060
GPL-5010
3.25 GHz Spectrum Analyzer
EMC Pretest Solution :
EMI Near Field Probe Set
Line Impedance Stabilization Network
Isolation Transformer
Transient Limiter
Power Cord, Certificate of Calibration, CD-ROM (with Quick Start Guide, User Manual,
Programming Manual, SpectrumShot Software, SpectrumShot Guide & IVI Driver)
Opt.01 Tracking Generator
Opt.02 Battery Pack
Opt.03 GPIB Interface
GSC-009
Soft Carrying Case
GRA-415
Rack Adapter Panel
SpectrumShot PC Software for Windows System (available on GW Instek website)
IVI Driver Supports LabVIEW/LabWindows/CVI Programming (available on NI website)
GPIB INTERFACE (OPTIONAL)
Connector Type
IEEE-488 bus connector
GENERAL
TRACKING GENERATOR (OPTIONAL)
Dimensions & Weight
Internal Data Storage
Power Consumption
Warm-up Time
Temperature Range
350(W) x 210(H) x 100(D) mm, Approx. 4.5kg
13.8(W) x 8.3(H) x 3.9(D) inch, Approx. 9.9lb
16 MB nominal
< 65 W
< 30 minutes
+5 °C ~ + 45 °C
-20 °C ~ + 70 °C
BATTERY PACK (OPTIONAL)
Battery Pack
Voltage
Capacity
6 cells, Li-Ion rechargeable, 3S2P
DC 10.8 V
5200 mAh/56Wh
AC POWER INPUT
Power Source
AC 100 V ~ 240 V, 50/60 Hz
IF OUTPUT
EARPHONE OUTPUT
VIDEO OUTPUT
RS-232C INTERFACE
Connector Type
Impedance
IF Frequency
Output Level
Connector Type
Connector Type
Connector Type
SMA female
886 MHz
-25 dBm
3.5mm stereo jack, wired for mono operation
DVI-I (integrated analog and digital), Single Link. Compatible with VGA or HDMI standard through adapter
D-sub 9-pin female
Inc. all options (Basic + TG + GPIB + Battery)
@160 MHz, -10 dBm, Source attenuation 10 dB, 20 ~ 30°C
± 1.5 dB
± 2 dB
Referenced to -10 dBm
Typical, output level = -10 dBm
Nominal
300 kHz ~ 3.25 GHz, source attenuation 12 dB≥
With UN38.3 Certification
Auto range selection
50
Nominal
Nominal
10 dB attenuation; RF input : 0 dBm @ 1 GHz
Tx , Rx , RTS , CTS
Note : The specifications apply when the GSP-9330 is powered on for at least 30 minutes to warm-up to a temperature of 20 to 30 ,
unless specified otherwise.
℃℃
Operating
Storage
SPECIFICATIONS
REFERENCE OUTPUT
REAR PANEL OUTPUTINPUT/
Connector Type
Output Frequency
Output Amplitude
Output Impedance
BNC female
10 MHz
3.3V CMOS
50
REFERENCE INPUT
Connector Type
Input Reference Frequency
Input Amplitude
Frequency Lock Range
BNC female
10 MHz
-5 dBm ~ +10 dBm
Within ± 5 ppm of the input reference frequency
ALARM OUTPUT
TRIGGER INPUT/GATED SWEEP INPUT
Connector Type
Connector Type
Input Amplitude
Switch
BNC female
BNC female
3.3V CMOS
Auto selection by function
LAN TCP/IP INTERFACE
Connector Type
Base
RJ-45
USB DEVICE
Connector Type
Protocol
B plug
Version 2.0
Nominal
Open-collector
For remote control only; supports USB TMC
Supports Full/High/Low speed
10Base-T; 100Base-Tx; Auto-MDIX
Absolute Point
Preamp Off
Preamp On
Center=160 MHz ; RBW 10 kHz; VBW 1 kHz; span 100 kHz; log scale; 1 dB/div; peak detector; 23°C±1°C; Signal at Reference Level
Preamp Off
100 kHz ~ 2.0 GHz
2GHz ~ 3.25 GHz
Preamp On
1 MHz ~ 2 GHz
2 GHz ~ 3.25 GHz
± 0.3 dB
± 0.4 dB
Ref level 0 dBm; 10 dB RF attenuation
Ref level 0 dBm; -30 dB RF attenuation
ABSOLUTE AMPLITUDE ACCURACY
FREQUENCY RESPONSE
ATTENUATION SWITCHING UNCERTAINTY
RBW FILTER SWITCHING UNCERTAINTY
LEVEL MEASUREMENT UNCERTAINTY
Attenuator Setting
Uncertainty
1 Hz ~ 1 MHz
Overall Amplitude Accuracy
Attenuation : 10 dB; Reference: 160 MHz; 20 ~ 30°C
± 0.5 dB
± 0.7 dB
Attenuation: 0 dB; Reference: 160 MHz; 20 ~ 30°C
± 0.6 dB
± 0.8 dB
0 ~ 50 dB in 1 dB step
± 0.25 dB
± 0.25 dB
± 1.5 dB
± 0.5 dB
Reference : 160 MHz, 10dB attenuation
Reference : 10 kHz RBW
20 ~ 30°C; frequency > 1 MHz; Signal input 0 ~ -50 dBm;
Reference level 0 ~ -50 dBm; Input attenuation 10 dB;
RBW 1 kHz; VBW 1 kHz; after cal; Preamp Off
Typical
SWEEP TIME
SWEEP
Range
204 s ~ 1000 sm
50 s ~ 1000 s
Sweep Mode
Trigger Source
Trigger Slope
Continuous; Single
Free run; Video; External
Positive or negative edge
RF PREAMPLIFIER
Frequency Range
1 MHz ~ 3.25 GHz
Gain
18 dB
FRONT PANEL INPUT/OUTPUT
RF INPUT
POWER FOR OPTION
USB HOST
MICRO SD SOCKET
Connector Type
Impedance
VSWR
Connector Type
Voltage/Current
Connector Type
Protocol
Protocol
Support Cards
N-type female
50
Nominal
<1.6 :1
SMB male
DC +7V/500 mA max
A plug
Version 2.0
SD 1.1
Micro SD, Micro SDHC
Span > 0 Hz
Span = 0 Hz; Min resolution=10 s
Nominal (installed as standard)
300 kHz ~ 3.25 GHz ; Input attenuator 10 dB
With short-circuit protection
Support Full/High/Low speed
Up to 32GB capacity
SPURIOUS RESPONSE
Second Harmonic Intercept
Third-order Intercept
Input Related Spurious
Residual Response (Inherent)
+35 dBm
+60 dBm
> 1dBm
< -60 dBc
<-90 dBm
Preamp off; signal input -30dBm; 0 dB attenuation
Typical; 10 MHz < fc < 775 MHz
Typical; 775 MHz fc < 1.625 GHz≤
Preamp off; signal input -30dBm; 0 dB attenuation
300 MHz ~ 3.25 GHz
Input signal level -30 dBm, Att. Mode, Att=0dB; 20-30ºC
Input terminated; 0 dB attenuation; Preamp off
SPECIFICATIONS
Frequency Range
Output Power
Absolute Accuracy
Output Flatness
Output Level Switching Uncertainty
Harmonics
Reverse Power
ConnectorType
Impedance
Output VSWR
100 kHz ~ 3.25 GHz
-50 dBm ~ 0 dBm in 0.5 dB steps
± 0.5 dB
Referenced ~ 160 MHz, -10 dBm
100 kHz ~ 2 GHz
2 GHz ~ 3.25 GHz
± 0.8 dB
< -30 dBc
+30 dBm max.
N-type female
50 W
< 1.6:1