User Manual User Manual

PEL-2000 Series User Manual
26
RS232 port/
GPIB port
The RS232 and GPIB port is
used for remote control
connections.
RS-232C: DB-9 pin male
GPIB: 24-pin female
See pages 233, 234 for remote
control details.
USB-A(host)/
USB-B (device)
port
The USB-B (device) port, like
the RS232/GPIB port is used
for remote control. Like the
front panel, the USB-A port is
used for data storage.
See page 89 for interface
details.
Frame Control
Port
The Frame Control port is
used for Frame Link
connections. Mainframes are
daisy-chained together. There
are two Frame control ports.
1: Slave
2: Master
Connection type: MIL 20-pin
connector.
For details about frame link
connections see page 54, 236.
Power Switch
External Power Switch